COMPANY HEADER
Request Information
Innovative gas mixer for mixing 2 or 3 gasses

The revolutionary Dansensor® MAP Mix Provectus uses an entirely new operating principle to advance the accuracy, operation and appearance of a gas mixer. Simple to use, highly reliable and rich in data, this mixer gives vital feedback on information such as current gas flow, total gas consumption and actual gas mix, at any time.

It is also simple when it comes to product selection - no longer do you need to worry about inlet and outlet pressure, whether it will work with your nitrogen or oxygen generators or which gasses you need to mix. Your only decision is whether you need to mix two or three gasses - everything else gets set up on the intuitive touch screen when you power up the unit for the first time.
Unit of Measure

Specifications

Brands

 N/A AMETEK® Dansensor® MOCON®

Mixer Configurations

 N/A 2-gas or 3-gas models available, with LCD display or as "Black-Box" without display

Connections

 N/A 2 x RS232C| LAN 10/100 Mbit (Modbus TCP)| USB| 24 VDC Logic for Start/Stop and Alarm
Alternating Current (AC) Voltage1 N/A 103 to 132 V207 to 264 V

Frequency

 N/A 47 to 63 Hz

Note for Power Supply

 N/A 24 VDC models available (excl. MAP Mix Provectus Argon)

Height

 N/A 192 mm

Width

 N/A 230 mm

Depth

 N/A 375 mm

Weight

 N/A 12.0 to 14.0 kg

Compliances

 N/A European Conformity (CE)

Gas Media

 N/A Any mix of dry O2, CO2, N2, air or Ar (optional) (0°C to +50°C gas temperature)

Gas Inlet Pressure

 N/A 2 to 10 bar

Pressure Drop

 N/A Example: 1 bar at 10 bar input pressure

Gas flow per Gas String

 N/A 6 to 500 L/min

Output Gas Flow

 N/A Total output flow up to: 1000 L/min (2-gas) and 1500 L/min (3-gas) depending on mixture setting.

Mixer Setting Range

 N/A 0 %2 to 100 %

Mixer Accuracy

 N/A ± 2% absolute in flow ranges above 50 L/min total output flow. Argon: ± 2% absolute at argon flow > 50 bar

Flow Measuring

 N/A Total and daily consumption.

Operating Modes

 N/A Buffer or flow configuration, selectable in software and by installation

Protection Kit

 N/A Ingress Protection (IP45) National Electrical Manufacturers Association (NEMA 3S)

Bracket, Assembly

 N/A Can be combined with MAP Check 3 Vacuum and MAP Check 3: 2 brackets, 8 screws.

Flow Range for Typical Mix1 for 2 Gases at (N2 80% + CO2 20%)

 N/A 30 to 625 L/min

Flow Range for Typical Mix1 for 3 Gases at (N2 70% + CO220% +O210%)

 N/A 60 to 714 L/min

Flow Range for Typical Mix2 for 2 Gases at (N2 60% + CO2 40%)

 N/A 15 to 833 L/min

Flow Range for Typical Mix2 for 3 Gases at (N2 70% + CO228% + O22%)

 N/A 300 to 714 L/min

Flow Range for Worst Case Mix for 2 Gases at (N2 98% + CO2 2%)

 N/A 300 to 509 L/min

Flow Range for Worst Case Mix for 3 Gases at (N2 88% + CO210% + O22%)

 N/A 300 to 568 L/min

Flow Range for Best Case Mix for 2 Gases at (N2 50% + CO2 50%)

 N/A 12 to 1000 L/min

Flow Range for Best Case Mix for 3 Gases at (N2 34% + CO233% + O233%)

 N/A 18 to 1470 L/min

Additional Information

 N/A Despite its compact size, the Dansensor® MAP Mix Provectus delivers an outstanding flow of up to 1500 liters per minute. If you require a higher flow rate, you can bridge up to three mixers and triple the capacity.

Benefits

Benefits

 N/A
  • Uses an intuitive touch screen for easy set-up and operation
  • Meets traceability requirements by storing accurate information about current gas flow, consumption over time and gas mix
  • Avoids operator errors with programming of up to 10 standard gas mixes
  • Integrates fully with the Dansensor® MAP Check 3 gas analyzer for ultimate eff effectiveness
  • Helps reduce gas cost on flow packaging machines when used in combination with Dansensor® MAP Check 3

Features

Features

 N/A
  • Data logging of consumption, date, time and gas mix
  • Very low pressure drop over the mixer, making it suitable for working with nitrogen and oxygen generators
  • USB, Ethernet (LAN), RS232, Modbus TCP connections for data logging and control
  • Mixes oxygen, nitrogen, carbon dioxide, air and argon (optional)

How Does it Work?

How Does it Work?

 N/A
  1. After unpacking, use the intuitive touch screen to easily program the mixer according to the gasses connected and the desired gas mixture. The Dansensor® MAP Mix Provectus can be programmed with up to 10 preset gas mixtures for easy change of gas mix by the operator.
  2. During operation,the Dansensor® MAP Mix Provectus ensures the correct gas mixture for the application and keeps the operator informed about inlet pressure, outlet pressure and gas flow. In case of any irregularities, the mixer alerts the operator.
  3. The Dansensor® MAP Mix Provectus provides operators and quality personnel with vital information about actual gas consumption, inlet and outlet pressure and gas mixture. Best of all, everything can be logged and transferred to a PC or an external data warehouse.

Note

Note

 N/A Specifications subject to change without notice.
  • 1 Auto ranging