Detector |
N/A Flame Ionization Detector (FID) with Oxidizer |
Ranges (CH4) |
N/A
User definable based upon calibration:
|
Accuracy, Repeatability |
N/A +1% full-scale |
Drift, Zero |
N/A +0.01% full-scale, 24 hours |
Drift, Span |
N/A +1% full-scale, 24 hours |
Response Time |
N/A T90 < 30 seconds |
Sampling |
N/A Internal single or multi-point, (pump optional) |
Alarms |
N/A Multilevel concentration and fault alarms, audible and visual |
Calibration |
N/A Programmable automatic or manual calibration |
Support Gas Requirement1 |
N/A
|
Display Type |
N/A Graphical Touch Display |
Display Size |
N/A 7 in17.8 cm |
Display Orientation |
N/A Diagonal |
Output |
N/A
|
Operating Temperature |
N/A 32 to 104 ºF0 to 40 ºC |
Non-Condensing Operating Humidity |
N/A 0 to 95 % |
Configuration |
N/A Benchtop or 19" (48.3 cm) Rack-Mount, 3U |
Height |
N/A 5.25 in13.02 cm |
Width |
N/A 19 in48.26 cm |
Depth |
N/A 16.25 in41.28 cm |
Weight |
N/A < 20 lb9.07 kg |
Alternating Current (AC) Voltage |
N/A 100 to 240 V |
Frequency |
N/A 50 Hz60 Hz |
Current |
N/A 1 A |
Accessories |
N/A
Preventative Maintenance Kit
|
Unique Needs |
N/A Whether collecting ambient air quality data or monitoring emissions to stay below required levels, environmental applications require highly accurate results and easy access to data for compliance and reporting. |
Features |
N/A
High Performance Effortless Operation Industry-approved gas measurement Reliable performance meets modern interface The BASELINE® Series of Continuous Hydrocarbon Analyzers (CHAs) from AMETEK MOCON® are instruments designed for continuous ambient or process hydrocarbon gas measurement in environmental or industrial settings. All instruments in the series are powered by our high-quality Flame Ionization Detection (FID) sensor, which enables fast, accurate measurement and low detection limits with minimal interference. The CHA Series combines reliable, industry-proven technology with a modern interface and straightforward troubleshooting, allowing you to focus on the results. Operation designed for humans High-quality data isn't enough if the instrument is difficult to use. The CHA Series features an intuitive, streamlined interface. Instruments include a range of capabilities to help simplify your process, including easily read results, real-time graphing, the ability to review historical data without pausing instrument operation, and dual display output. The CHA Series also features networking capabilities for easier connectivity, data sharing within a network, and remote diagnostics. Fast and Accurate - FID Our proprietary FlowGuard electronic control regulates the delivery of fuel, air and a small portion of the sample gas to the FID. During combustion, gases are ionized, measured and reported as a concentration. This method provides fast gas measurement with some of the highest accuracy levels on the market. Intuitive Interface
|