Sensor module for O2 monitoring: Process analyzer with low maintenance demand
If all you need is a readout of the oxygen concentration in a pure gas or gas mixture of inert gas or CO2 then the Dansensor® ISM-3 is the answer. There is nothing complicated about it - just connect it to a pressurized tank or use the pump version of the Dansensor® ISM-3 to draw a sample from your process.
The Dansensor® ISM-3 is highly accurate and yet simple to use.
Typical applications for the Dansensor® ISM-3 are measuring purity levels from gas generators or measurement of the residual oxygen level in nitrogen flushing processes.
However, if you are concerned about your gas consumption or if you need data logging capabilities, also remember to evaluate the Dansensor® MAP Check 3 gas analyzer.
If all you need is a readout of the oxygen concentration in a pure gas or gas mixture of inert gas or CO2 then the Dansensor® ISM-3 is the answer. There is nothing complicated about it - just connect it to a pressurized tank or use the pump version of the Dansensor® ISM-3 to draw a sample from your process.
The Dansensor® ISM-3 is highly accurate and yet simple to use.
Typical applications for the Dansensor® ISM-3 are measuring purity levels from gas generators or measurement of the residual oxygen level in nitrogen flushing processes.
However, if you are concerned about your gas consumption or if you need data logging capabilities, also remember to evaluate the Dansensor® MAP Check 3 gas analyzer.
| Items |
 600286 Dansensor® ISM-3x 230 Volts Sensor Module with Pressurized Tank |
600285 Dansensor® ISM-3i 230 Volts Sensor Module with Pressurized Tank |
600287 Dansensor® ISM-3i 230 Volts Sensor Module with Pump |
600288 Dansensor® ISM-3x 230 Volts Sensor module with Pump |
600281 Dansensor® ISM-3x 115 Volts Sensor Module with Pressurized Tank |
|||||
| Description |
Sensor module for O2 monitoring: Process analyzer with low maintenance demand If all you need is a readout of the oxygen concentration in a pure gas or gas mixture of inert gas or CO2 then the Dansensor® ISM-3 is the answer. There is nothing complicated about it - just connect it to a pressurized tank or use the pump version of the Dansensor® ISM-3 to draw a sample from your process. The Dansensor® ISM-3 is highly accurate and yet simple to use. Typical applications for the Dansensor® ISM-3 are measuring purity levels from gas generators or measurement of the residual oxygen level in nitrogen flushing processes. However, if you are concerned about your gas consumption or if you need data logging capabilities, also remember to evaluate the Dansensor® MAP Check 3 gas analyzer. |
|||||||||
| Brands | AMETEK® Dansensor® MOCON® | |||||||||
| Pressure | Yes | Yes | No | No | Yes | |||||
| Pump | No | No | Yes | Yes | No | |||||
| Remote Display | No | Yes | Yes | No | No | |||||
| Built-in-Display | Yes | No | No | Yes | Yes | |||||
| Alternating Current (AC) Voltage | 230 V | 230 V | 230 V | 230 V | 115 V | |||||
| Alternating Current (AC) Voltage Tolerance (±) | 10 % | |||||||||
| Frequency | 50 Hz60 Hz | |||||||||
| Weight | 3.8 kg | 3.7 kg | 3.7 kg | 3.8 kg | 3.8 kg | |||||
| Cabinet Height | 125 mm | |||||||||
| Cabinet Width | 185 mm | |||||||||
| Cabinet Depth | 160 mm | 125 mm | 125 mm | 160 mm | 160 mm | |||||
| Display Height | 96 mm | 96 mm | ||||||||
| Display Width | 96 mm | 96 mm | ||||||||
| Display Depth | 20 mm | 20 mm | ||||||||
| Note for Display | 3 mm bezel for panel mounting. | 3 mm bezel for panel mounting. | ||||||||
| Sensor Type | Ceramic Solid State O2 Sensor | |||||||||
| Start-Up Time1 | 10 min | |||||||||
| Calibration Intervals | 12 m | |||||||||
| Accuracy | ± 1 Digit in Calibrated Range. Better than ± 1 % of the Displayed Value | |||||||||
| Sensor Flow | 125 mL/min | |||||||||
| Alarms | Two O2 concentration alarm settings, system fault alarm (bad gas flow, sensor error, etc.) | |||||||||
| Maximum Alarm Output | 48 V1 A | |||||||||
| Note for Alarm Output | Common, N.O. or N.C. | |||||||||
| Current Output | 0/4 - 20 mA as standard (optional: 0-10V if specified with the order), scale can be defined by operator, i.e. 0-1%, 0-100 ppm. | |||||||||
| Signal Input | 10 to 32 VDC external measuring control signal for start/stop of the analyzer. | |||||||||
| Cabinet Material | Stainless Steel | |||||||||
| Measuring Range | 0 to 100 % | 1 to 100 % | 2 to 100 % | 3 to 100 % | 4 to 100 % | |||||
| Note for Measuring Range | Standard calibration 0-20.9% | |||||||||
| Benefits |
|
|||||||||
| Features |
|
|||||||||
| Additional Information | Optional sample kit for flow packaging machines (part number 270165) | |||||||||
| Note | Specifications subject to change without notice. Further specifications are available in the User Guide. | |||||||||
|
||||||||||
