AMETEK MOCON - Dansensor® MAP Check 3 Pressure Analyzers

Unit of Measure

Items	1209 Dansensor® MAP Check 3 Oxygen(O₂) Pressure Analyzer	1210 Dansensor® MAP Check 3 carbon dioxide (CO₂) Pressure Analyzer
Description	N/A A Flexible Way To Control Your Gas Gas analyzer for quality assurance of pressurized gas mixes Everyone knows that gas is invisible, but your bottom line could also become less visible, if the wrong gas mix is supplied to your process. In order to ensure that you always get the right blend of gases, we have designed the Dansensor® MAP Check 3 Pressure. It is a simple and efficient gas analyzer which precisely measures pressurized gases directly from a gas mixer, buffer tank or other sources.
Brands	N/A AMETEK® Dansensor® MOCON®
Available Sensors	N/A Dansensor® MAP Check 3 Oxygen (O₂) Sensor	N/A Dansensor® MAP Check 3 Carbon Dioxide (CO₂) Sensor
Key Features	N/A Our fastest and most accurate oxygen sensor, 0-100% range	N/A Temperature controlled dual beam infrared carbon dioxide sensor, 0-100% range
Accuracy	N/A ± 0.01% absolute range below 1% O₂ ± 1% relative in range above1% O₂	N/A ± 0.5% absolute ± 1.5% relative of reading
Heating Time	N/A 10 min	N/A 8 min
Models	N/A Oxygen only, carbon dioxide only or combined oxygen and carbon dioxide
Connections	N/A 2 x RS232C 24 VDC Logic for Start/Stop of Process and Alarms Current or Voltage Output LAN 10/100 Mbit (Modbus TCP) Universal Serial Bus (USB)
Alternating Current (AC) Voltage¹	N/A 103 to 132 V207 to 264 V
Frequency	N/A 47 to 63 Hz
Height	N/A 192 mm
Width	N/A 230 mm
Depth	N/A 375 mm
Weight²	N/A 8.5 to 11.5 kg
Compliances	N/A European Conformity (CE)
Gas Inlet Pressure	N/A 2 to 10 bar30 to 145 psi
Display Size	N/A 5 in
Display Type	N/A Color Touch Screen
Gas Media	N/A Dry, clean and non-corrosive gasses
Protection Kit	N/A Ingress Protection (IP45) National Electrical Manufacturers Association (NEMA 3S)
Bracket, Assembly	N/A Can be combined with MAP Check 3 and MAP Check Vacuum: 2 brackets, 8 screws.
Benefits	N/A Ensures that the right gas mix is supplied to your process. Logs and displays actual gas mix. Works with inlet pressures from 2-10 bar (30-145 psi). Can stop your process before the wrong gas mix is supplied.
Features	N/A 5" color touch screen. Excellent data logging capabilities with USB, Ethernet, TCP Modbus. Optional integrated control of the Dansensor® MAP Mix Provectus gas mixer.
How Does it Work?	N/A Before running the Dansensor® MAP Check 3 Pressure for the first time, enter the exact tolerances for the gas mixture you wish to achieve. Both upper and lower values can be entered for each gas. During operation, the Dansensor® MAP Check 3 Pressure continuously measuresthe oxygen and/or carbon dioxide levels in your gas mix. If the oxygen or carbon dioxide level nears the preset limits, Dansensor® MAP Check 3 Pressure notifies the operator. If the limits are exceeded, Dansensor® MAP Check 3 Pressure stops the process.
Additional Information	N/A With the ability to measure both oxygen and carbon dioxide, it can measure the balance between the gases, while checking your gas mixture for oxygen impurities. The Dansensor® MAP Check 3 Pressure also provides traceability. It has internal data storage capabilities, as well as ethernet, USB and serial connections for external data storage. The Dansensor® MAP Check 3 Pressure works perfectly in tandem with the Dansensor® MAP Mix Provectus gas mixer. By letting the Dansensor® MAP Check 3 Pressure monitor the output of the gas mixer, you will be in complete control of your gas mix. If anything goes wrong with the gas mix, the Dansensor® MAP Check 3 Pressure stops the gas mixer.
Note	N/A Specifications subject to change without notice.
¹ Auto ranging ² Depending on model