COMPANY HEADER
Request Information
At AMETEK MOCON, we offer global, on-site and prototype package testing services. Our test applications include automotive component test, transmission testing and generator set test systems, engine and harness testing, assembly line monitor and control. Software we utilize include test control, can interface and embedded application. Our manufacturing system engineering and integration services include data acquisition, ECM and intelligent device integration, computer based product design, product quality assurance testing, assembly and test data management.

We perform different types of analytical testing including catalyst aging, chemical, coating, compliance, high purity, metallurgical, microbiological, mixed flowing, gases, pH, physical properties, polymer, pressure, stress analysis, thermal properties, tin whisker, toxicology and volumetric. At our facility, we utilize O2, CO2 and N2 headspace, leak, burst, in-line headspace, gas mixing, infrared, accelerated, cryogenic, destructive, downhole, EMC, EMI/RFI, ESD, HAHST, HALT, HASS, HCF, magnetic, hydrostatic, x-ray, visual, ultraviolet, ultrasonic and radiographic testing methods.

We check various characteristics and properties of packages including abrasion, acceleration, circuit continuity, corrosion, durability, dynamic friction, reliability, fluid compatibility and integrity, static electricity, strain, stress analysis, wear, transportation simulation, surface finish and tension. Additional services such as consulting, diagnostics, preventative maintenance, research and retesting are available. Our quality department is Kaizen/5S, yellow, green and black belt Six Sigma certified. We are capable of providing lean and lights out manufacturing services. Lead times are quoted on a Job by Job basis.

Emergency and rush services are available. We comply with ANSI, AS, ASME, ASTM, AWS, CSA, DOT, FDA, ISO, NADCAP, QS, RoHS, SAE, TS and military standards. Our clients come from a diverse range of industries including electronics, aerospace, automotive, agriculture, biotechnology, chemical, electrical, energy, food, marine, medical, military, mining, nuclear, robotics, textile, telecommunication, transportation, waste management and petrochemical. To know more about our world-class package testing services, contact us today.
Unit of Measure

Specifications

General Capabilities

 N/A Global On-Site Prototype

Test Applications

 N/A Barrier Film Testing Engine Testing Transmission Testing Systems Generator Set Test Systems Harness Testing Assembly Line Monitor and Control Automotive Component Test

Software

 N/A Test Control Software Industry Standard Software Interface Protocol Compliance Embedded Application Software Can Interface Software

Manufacturing Systems Engineering and Integration

 N/A Data Acquisition and Control Enterprise Content Management (ECM) and Intelligent Device Integration Assembly and Test Data Management Computer Based Product Design Product Quality Assurance Testing

Analytical Testing

 N/A Catalyst Aging Chemical Coating Compliance High Purity Metallurgical Microbiological Mixed Flowing Gases pH (Positive Hydrogen (pH Testing)) Physical Properties Polymers Pre-Clinical Pressure Stress Analysis Thermal Properties Tin Whisker Toxicology Volumetric Testing

Headspace Testing

 N/A Oxygen (O2) Carbon Dioxide (CO2) Nitrogen (N2)

Leak Testing

 N/A Destructive Non-Destructive

Test Method

 N/A Headspace Gas Type Leak Burst In-line Headspace Gas Mixing Accelerated Cryogenic Destructive (Intentional operation of equipment until it fails, to reveal design weaknesses. A method of testing a material that degrades the sample under investigation.) Downhole EMC (ElectroMagnetic Compatibility: The situation in which electrical and electronic devices and systems work as intended, both within themselves and in their electromagnetic environment.) Electromagnetic Interference (EMI)/Radio Frequency Interference (RFI) Electrostatic Discharge (ESD) (ElectroStatic Discharge (Sparks (electrons) that jump from an electrically charged object to an approaching conductive object.)) HAHST (Highly Accelerated Humidity Stress Test) HALT (Highly Accelerated Life Testing. The second step in HALT testing is the HASS test. See HASS.) HASS (Highly Accelerated Stress Screen. Used in conjunction with HALT) HCF (High Cycle Fatigue) Helium Leak HIRF (High Intensity Radiated Field) Hydrostatic Infrared Liquid Flow Magnetic (Magnetic Testing and Magnetic Stripe Testing: Is the testing of magnetic materials BH curves, coating, plating, engineering design, magnetizing, marking, identification, stabilization, calibration, testing and certification.) Magnetic Particle (Magnetic particle inspection is a nondestructive inspection method used for detection of surface and subsurface flaws in ferrous parts.) NDT (Non-Destructive Testing) Non-Clinical NVH (Noise Vibration Harshness) Operational Shape Deflection Particles Penetrant Radiographic Ultrasonic Ultraviolet Visual X-Ray

Test Characteristics and Properties

 N/A Abrasion Acceleration Circuit Continuity Corrosion Durability Dynamic Friction Fluid Compatibility Fluid Integrity Friction Performance Reliability Static Electricity Strain Stress Analysis Structural Surface Finish Surface Tension Transportation Simulation Wear

Additional Services Provided

 N/A Consulting Diagnostics Preventative Maintenance Research Retesting

Lead Times

 N/A Quoted on Job by Job Basis Emergency Services Available Rush Services Available

Efficiency

 N/A Six Sigma Yellow Belt Certification Six Sigma Green Belt Certification Six Sigma Black Belt Certification Lights Out Manufacturing Lean Manufacturing Kaizen/5S

Additional Information

Industry Focus

 N/A Advertising Aerospace Agricultural Alternative Energy Appliance Commercial Appliance Residential Architecture Auto/Truck/Transportation Automation Automotive Biomedical Biopharmaceutical Biotechnology Building and Construction Chemical Chemical Manufacturing Chemical Processing Commercial Communications Computer and Electronics Construction Consumer Goods Cosmetics Cryogenic Dairy Defense Industry Dental Department of Defense (DOD) Department of Energy (DOE) Electrical Electronics Energy Firearms Food and Beverage Food Handling Food Processing Food Production Fracking Genetics Government Heating, Ventilation, and Air Conditioning (HVAC) Heavy Equipment Heavy Truck Highway (Department of Transportation (DOT)) Home Home Furnishing Household Hydraulics Ice Making Industrial Injection Molding Laboratory Laundry Liquid Propane Machine Tools Machinery Manufacturing Marine Material Handling and Processing Medical Medical Devices Military Mining Molding Municipal Nano Technology Manufacturing Natural Gas Nuclear Oil and Gas Pipeline Oil Field Oil, Gas, and Petroleum Exploration Oil, Gas, and Petroleum Extraction Optical Packaging Packaging and Converting Paper Mill Petrochemical Pharmaceutical Plumbing Pneumatics Power Generation Power Generation Alternative Power Generation Coal Power Generation Natural Gas (NG) Power Generation Nuclear Power Generation Solar Power Generation Wind Printing Printing and Publishing Process Gases Pulp and Paper Pulp Manufacturing Pumps Railroad Recreational Research Residential Restaurant Retail Robotics Semiconductor Specialty Machinery Telecommunications Textile Tool and Die Transportation Turf and Garden Universities and Learning Institutions Vacuum Electronics Waste Management Wastewater Water and Wastewater Treatment

Industry Standards

 N/A ANSI (American National Standards Institute) AS (Aerospace Industry Standard) ASME (American Society of Mechanical Engineers) ASTM (American Society for Testing and Materials) AWS (American Welding Society) CSA (Canadian Standards Association) DOT (Department of Transportation) FDA (Food and Drug Administration) ISO (International Organization for Standardization) Mil-Spec (Military Specifications) NADCAP (National Aerospace and Defense Contractors Accreditation Program) QS (QS is a Quality Standard Developed by the Automotive Industries.) RoHS (Restriction of Hazardous Substances (Compliant)) SAE (Society of Automotive Engineers) TS (Technical Specifications, used with ISO)

File Formats

 N/A AlphaCAM (AMD, ATD) AutoCAD (DWG, DWZ) BMP (Bit Mapped Graphics) Catia (CATDrawing, CATPart) Delcam (DGK, DMT) DXF (Drawing Interchange Format, or Drawing Exchange Format) GIF (Graphics Interchange Format) IGES (Initial Graphics Exchange Specification, ANSI File Format) Inventor (IDW, IPT) IronCAD (ICD, ICS) JPG or JPEG (Joint Photographic Experts Group) MasterCam (MDX, MC8, MC9, SET) PDES (Product Data Exchange using STEP, Standard for the Exchange of Product Model Data. A standard format for exchanging data between advanced CAD and CAM programs.) PDF (Portable Document Format) Pro-E or Pro/Engineer (DRW, PRT, XPR) SAT (3D ACIS Model File) SolidEdge (DFT) SolidWorks (SLDPRT, SLDDRW, SLDDRT) STEP (Standard for the Exchange of Product Model Data) SurfCam (DSN) TIFF (Tagged Image File Format) TurboCAD (TCW, TCX) Unigraphics (PRT)