COMPANY HEADER
Request Information
The 9000 Total Carbon analyzer utilizes a flame ionization detector (FID) in conjunction with a catalytic methanizer that converts the CO and CO2 to methane (CH4) and leaves the hydrocarbons unchanged for a total carbon measurement which is then subtracted from the total carbon concentration to determine the combined CO/CO2 reading.
Unit of Measure

Specifications

Brands

 N/A AMETEK® MOCON®

Accurate Detection

 N/A
  • User definable ranges
  • Detection limits <100 ppb as methane
  • Automatic calibration
  • Drift <0.01% of full-scale over 24 hours

Detector

 N/A Flame Ionization Detector (FID)

Ranges (CH4)

 N/A User definable based upon calibration:
  • Low - 0.1 ppm to 100 ppm
    •

    Accuracy

    		 N/A +1% full-scale response.

    Drift, Zero

    		 N/A +0.01% full-scale, 24 hours.

    Drift, Span

    		 N/A +1% full-scale, 24 hours.

    Response Time

    		 N/A T90 < 30 s

    Sampling

    		 N/A Internal single point (pump optional)

    Alarms

    		 N/A Multilevel concentration and fault alarms, audible and visual.

    Calibration

    		 N/A Manual Calibration Programmable Automatic
    Support Gas Requirement1 N/A
    • UHP Hydrogen (H2) 30 cc/min
    • Zero air - 175 cc/min
    • Span gas - methane with CO or CO2typical

    Display Width

    		 N/A 3.4 in8.64 cm

    Display Length

    		 N/A 4.5 in11.43 cm

    Display Type

    		 N/A Graphical Liquid Crystal Display (LCD)

    Outputs

    		 N/A
    • LAN/Ethernet, RS-232
    • Analog, 1 programmable 0-20mA/4-20mA isolated output
    • Relays, 5 programmable From A relays rated to 3A at 230VAC

    Operating Temperature

    		 N/A 32 to 104 ºF0 to 40 ºC

    Non Condensing Operating Humidity

    		 N/A 0 to 95 %

    Prevenitive Maintenance Kit

    		 N/A Includes all parts potentially needed on-hand

    Gas Generators

    		 N/A
    • Hydrogen Generator
    • Zero Air generators

    Software

    		 N/A 9000 Keeper provided for method switching via PC

    Service and Support Options

    		 N/A Start-up and training, 1 day onsite

    Height

    		 N/A 5.25 in13.02 cm

    Width

    		 N/A 19 in48.26 cm

    Depth

    		 N/A 16.25 in41.28 cm

    Weight

    		 N/A <20 lb9.07 kg

    Alternating Current (AC) Voltage

    		 N/A 100 to 240 V

    Frequency

    		 N/A 50 Hz60 Hz

    Current

    		 N/A 1 A

    Configuration

    Configuration

    		 N/A Benchtop or 19" (48.3 cm) Rack-Mount, 3U

    Applications

    Applications

    		 N/A Hydrocarbon & CO/CO2 Impurities in Ultra-Pure Gasses
    • Argon, Ar
    • Helium, He
    • Hydrogen, H2
    • Nitrogen, N2

    Features

    Features

    		 N/A
    • Automatic FID ignition
    • Automatic calibration at user-defined intervals
    • Internal multi-point sampling option
    • Electronic back-pressure regulator with sample bypass system
    • Flow Guard Control of fuel, air, and sample
    • Graphic LCD display with easy to use menu
    • Benchtop or rack-mountable
    • Single or multi-point sampling
    • Customizable Ethernet or serial output
    • Programmable analog output ranges
    • Programmable relays for iagnostics, concentration, alarms, and events

    Additional Information

    Additional Information

    		 N/A All instrument parameters are reported clearly and continually refreshed on a large, graphical LCD display. Using analog, digital, and logic output communication capabilities, analytical information from the analyzer can be acquired using an external PC and a simple communications program such as Windows® HyperTerminal or the analyzer can output binary or ASCII formats directly to a data acquisition system or PLC. Every Baseline® 9000 analyzer includes MOCON’s free PC utility 9000 Keeper used for storing and uploading multiple methods, as well as sending configuration settings, directly to the analyzer.
    • 1 Fuel blend options available