COMPANY HEADER
Request Information
The 9000 Methane/Non-Methane analyzer uses a flame ionization detector (FID) in conjunction with an oxidation catalyst that oxidizes all hydrocarbons except methane to produce a methane measurement which is then subtracted from the total concentration to determine the non-methane hydrocarbon reading.
Unit of Measure

Specifications

Brands

 N/A AMETEK® MOCON®

Accurate Detection

 N/A
  • User definable ranges
  • Automatic adjustment for catalyst efficiency variance
  • Fast (<30 sec) reproduceable response
  • Automatic calibration

Detector

 N/A Flame Ionization Detector (FID) with Oxidizer

Ranges (CH4)

 N/A User definable based upon calibration:
  • Low - 0.03 ppm to 50 ppm
  • Medium - 0.06 ppm to 500 ppm
  • High - 0.15 ppm to 5000 ppm

Accuracy

 N/A +1% full-scale response.

Drift, Zero

 N/A +0.01% full-scale, 24 hours.

Drift, Span

 N/A +1% full-scale, 24 hours.

Response Time

 N/A T90 < 30 s

Sampling

 N/A Internal single or multi-point, (pump optional)

Alarms

 N/A Multilevel concentration and fault alarms, audible and visual.

Calibration

 N/A Manual Calibration Programmable Automatic
Support Gas Requirement1 N/A
  • UHP Hydrogen (H2) 35 cc/min
  • Zero air - 175 cc/min
  • Span gas - methane/propane is typical

Display Width

 N/A 3.4 in8.64 cm

Display Length

 N/A 4.5 in11.43 cm

Display Type

 N/A Graphical Liquid Crystal Display (LCD)

Outputs

 N/A
  • LAN/Ethernet, RS-232
  • Analog, 1 programmable 0-20mA/4-20mA isolated output
  • Relays, 5 programmable From A relays rated to 3A at 230VAC
(Optional)
  • 3 additional analogs

Operating Temperature

 N/A 32 to 104 ºF0 to 40 ºC

Non Condensing Operating Humidity

 N/A 0 to 95 %

Prevenitive Maintenance Kit

 N/A Includes all parts potentially needed on-hand

Gas Generators

 N/A
  • Hydrogen Generator
  • Zero Air generators

Software

 N/A 9000 Keeper provided for method switching via PC

Service and Support Options

 N/A Start-up and training, 1 day onsite

Height

 N/A 5.25 in13.02 cm

Width

 N/A 19 in48.26 cm

Depth

 N/A 16.25 in41.28 cm

Weight

 N/A <20 lb9.07 kg

Alternating Current (AC) Voltage

 N/A 100 to 240 V

Frequency

 N/A 50 Hz60 Hz

Current

 N/A 1 A

Configuration

Configuration

 N/A Benchtop or 19" (48.3 cm) Rack-Mount, 3U

Applications

Applications

 N/A
  • VOC Continuous emission monitoring systems
  • Ambient air quality monitoring system
  • Airborne molecular contamination
  • Available in ambient or 120º for heated samples
  • Beverage-grade CO2 analysis
  • Ultra-Pure gases
  • Well Logging
  • Industrial hygiene & safety
  • LEL monitoring
  • VOC continuous emission monitoring systems
  • Ambient air quality monitoring system
  • Airborne molecular contamination
  • Compliance monitoring for EPA Method 25A
  • Continuous emission stack monitoring
  • Vehicle emissions

Features

Features

 N/A
  • Automatic FID ignition
  • Automatic calibration at user-defined intervals
  • Internal multi-point sampling option
  • Electronic back-pressure regulator with sample bypass system
  • Flow Guard Control of fuel, air, and sample
  • Graphic LCD display with easy to use menu
  • Benchtop or rack-mountable
  • Single or multi-point sampling
  • Customizable Ethernet or serial output
  • Programmable analog output ranges
  • Programmable relays for iagnostics, concentration, alarms, and events

Additional Information

Additional Information

 N/A All instrument parameters are reported clearly and continually refreshed on a large, graphical LCD display. Using analog, digital, and logic output communication capabilities, analytical information from the analyzer can be acquired using an external PC and a simple communications program such as Windows® HyperTerminal or the analyzer can output binary or ASCII formats directly to a data acquisition system or PLC. Every Baseline® 9000 analyzer includes MOCON’s free PC utility 9000 Keeper used for storing and uploading multiple methods, as well as sending configuration settings, directly to the analyzer.
  • 1 Fuel blend options available